Universal Fighting Engine

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Camera Options ======
Set the camera's initial positions as well as the zoom and smooth translation. These values can be changed at run-time.

{{ :global:global_cameraoptions.png?nolink |}}

**Initial Distance:** The camera's initial position.

**Initial Rotation:** The camera's initial and default rotation.  NOTE: This is somewhat overridden if ''Enable LookAt'' (below) is toggled on.

**Vertical Follow:**
  * **Disabled:** Vertical follow will not be used
  * **Average Distance:** The camera averages the height between the characters
  * **Highest Character:** The camera focus on the highest character in the air

**Enable LookAt:** Toggle this to uses Unity's [[http://docs.unity3d.com/ScriptReference/Transform.LookAt.html|LookAt()]] function.  This means the camera is always looking at the pivot point between the two players (including rotation offset). Movement Speed will //not// affect the rotation speed of the camera.
  * **Rotation Speed:** How fast the camera will rotate towards the action.
  * **Rotation Offset:** The default rotation values for the camera when LookAt is enabled.
  
  * **Motion Sensor (Mobile Only):** Uses the device's Accelerometer and Gyroscope to create small camera movements.
 
  * **None:** Motion sensor will not be used
  * **Accelerometer:** (Coming soon)
  * **Gyroscope:** Bends the camera according to the inclination angle of the mobile device.

**Field of View:** Set the camera's initial and default field of view.

**Camera move Speed:** How fast will the camera move to follow the action.

**Enable Zoom:**
  * **Minimum Zoom:** How close will the camera get to battle as the characters approach one another.
  * **Maximum Zoom:** How far can the camera get to as the characters distance from one another. This also visually determines how far off they can move from one another.

**Maximum Players Distance:** The maximum distance the characters have between them.

----
Code access:

''UFE.config.cameraOptions''

Code example:
<code c#>void Awake(){
	UFE.config.cameraOptions.initialFieldOfView = 10;
}</code>
----

[[global:start|< Back to Global Editor]]
Universal Fighting Engine

User Tools

Site Tools

Page Tools
