Differences

This shows you the differences between two versions of the page.

--- move:input [2016/09/19 18:32]
Mistermind
+++ move:input [2017/01/11 02:39]
Mistermind
@@ Line 20: / Line 20: @@
 **Button Executions:** After the sequence of buttons have been successfully executed, use this option to select which button(s) must be pressed in order to successfully trigger the move. If your move is just a standard attack, just assign its button here.
-  * **On Button Press:** Move is executed on press of below button(s).
+  * **On Button Press:** Move is executed on press of the button(s).
-  * **On Button Release:** Move is executed on release of the below button(s).
+  * **On Button Release:** Move is executed on release of the button(s).
-  *   * Requires Press First: If toggled, this move will only come out if the engine detects the button was previously pressed. Useful to have in focus attack like moves where input execution sometimes occur during buffers.
+    * //Requires Press First:// If toggled, this move will only come out if the engine detects the button was previously pressed. Useful to have in focus attack like moves where input execution sometimes occur during buffers.
-In Street Fighter, special moves can be executed either on Press or on Release.  Enable both options to mimic that behaviour.\\
+In Street Fighter, special moves can be executed either on Press or on Release. Enable both options to mimic that behaviour.\\
 Normal attacks should only be executed on Press.\\
 Boxer's TAP or MvC3's Zero's Hyper Zero Blaster should only be executed on Release.
-__NOTE:__ If both Press and Release are off, then the move cannot be executed.  At least one of the must be enabled to allow the move to be executed.
+__NOTE:__ If both Press and Release are off the move will not be executed. At least one of the must be enabled to allow the move to be executed.
 ----

Universal Fighting Engine

User Tools

Site Tools

Differences

Page Tools